Electia SDA-9 Instrucciones de operaciones descargar pdf (Pagina 7)

GUIDE TO INSTALLATION AND OPERATION

SDA-1401 | 3

2 Installation

2.1 Unpacking

Make sure the following items have been shipped with your SDA-1401. If any of the following items are

missing, contact your distributor or Miranda Technologies Inc.

• SDA-1401 Reclocked DA Module

• SDA-1401-XXX Rear Panel as ordered (see section 2.3)

2.2 Installation in the Densité frame

The SDA-1401 and its associated rear connector rear panel must be mounted in a DENSITÉ frame. It is not

necessary to switch off the frame’s power when installing or removing the card.

• Install the rear panel with the card out of the frame, then insert the card

See the DENSITÉ Frame manual for detailed instructions for installing cards and their associated rear

panels.

2.3 Rear Panels and Connections

Six rear panels are available for the SDA-1401 – see Figure 2.1 (2RU panels) and Figure 2.2 (3RU panels).

SDA-1401-SRP SDA-1401-SRP-R SDA-1401-DRP SDA-1401-DRP-R

Figure 2.1 SDA-1401 2RU rear panels

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Sin comentarios

Electia SDA-9 Instrucciones de operaciones Pagina 7