Electia SDA-9 Especificaciones descargar pdf (Pagina 5)

II. LUBRlCATlON

D. Differential Carriers

Differential carriers should have the lubricant

changed at the same intervals as the rear axle on the

vehicle, or at 10,000 mile intervals. Drain while lubri-

cant is warm. Clean the magnetic drain plug when it is

removed. Remove the fill plug to ensure quicker

drainage. Allow housing to drain completely. Install

the drain plug and fill the housing with the appropriate

gear oil to the bottom of the fill plug hole. Check for

leaks. SAE 140 gear oil (meeting Mil-L-2105B) is

appropriate for most operating conditions. Follow the

vehicle manufacturers recommendations for the rear

axle and apply them to the front axle under other

conditions.

E. Steering Tie Rod Ball Joints

Steering tie rod ball joints should be lubricated every

1,000 miles with chassis lubricant (See fig. 3, Page 3.)

Check the steering system at each lubrication. Inspect

for loose, bent or otherwise damaged components.

Careful attention to such detail is a vital safety factor.

Fig. 4

Fig. 5

Fig. 6

—4—

1 2 3 4 5 6 7 8 9 10 ... 24 25

Sin comentarios

Electia SDA-9 Especificaciones Pagina 5