Electia Home Prosafe Sc9100 Manual de usuario descargar pdf (Pagina 15)

Advanced Home Automation functionsAdvanced Home Automation functions

Basic address for Home Automation functions

The basic adress is set to control multiple Home Automation modules on the Base console. The standard basic

address is A1. The A in this address is called the House Code. The House Code of the console, the remote

controls and the Home Automation modules all have to have the same letter. The 1 in the basic adress is called

the Unit Code. If your neighbour also have a security system, it may be necessary to change the basic addresses

and the addresses of your X10 modules. If you change the House Code of the console, the addresses for the

Home Automation functions also change.

1.To access the menu, press the menu upp or menu down button. The display now shows ENTER PIN.

2.Enter your 4-digit PIN code (factory setting 0000 se page 12 for changing the PIN code).

3.When the PIN code has been entered correctly, the word INSTALL will show up on the display.

4.Use the menu buttons upp /down to go to menu item 7. OPTIONS. Press OK to select this menu item. You can

also go to this menu item directly by pressing a 7 on the number pad.

5. Use the menu buttons upp/down to go to menu item HOUSECODE. Press OK to select this menu item.

6. Use the menu buttons upp/down to select the desired House Code and press OK.

7. Press CLEAR again to quit the menu.

Change the Unit Code (UC).

1.To access the menu, press the menu upp or menu down button. The display now shows ENTER PIN.

2. Enter your 4-digit PIN code (factory setting 0000. See page 12 for changing the PIN code.) The display is

cleared and shows a * for changing the PIN code.

3. When the PIN code has been entered correctly, the word INSTALL will show up on the display.

4. Use the menu buttons upp/down to go to menu item 7. OPTIONS. Press OK to select this menu item. You can

also go to this menu item directly by pressing a 7 on the number pad.

5. Use the menu buttons upp/down to go to menu item UNITCODE. Press OK to select this menu item.

6. Use the menu buttons upp/down to select the desired Unit Code and press OK.

7. Press CLEAR again to quit rthe menu.

Telephone functions

Calling the security system.

The alarm system is equipped with a call-in-function. This means that you can dial in to the console remotely via

any telephone or mobile phone. You can also control your lights, devices and temperature setbacks via your

phone. The system has a built-in speech chip that guides you through the menues.

Activating the call-in function

The call-in function is switched off in the factory settings. You can switch the function on via the menu

OPTIONS/ANSWER TYPE. You can choose one of the following three options:

ANSWER ON: Call-in activated. The time delay before the console answers the phone can be set in the menu

DELAYS/ANSWER DELAY. The standard delay is 30 seconds. If you use an answer phone or voice mail, we

advice you to use option 3: VOICE MAIL.

ANSWER OFF: The call-in function is deactivated (standard setting)

VOICE MAIL: Call-in activated. Choose this option when you use the standard voicemail system offered by

your telecom supplier. To access the console, ring your home number twice. Let the phone ring for 10 seconds the

first time. Hang up the phone and ring the number again after 10 seconds, but within 30 seconds. The console will

answer the phone.

Setting the call-in function:

1. To access the menu, press the menu upp or menu down button.The display now shows ENTER PIN.

2. Enter your 4-digit PIN code (factory setting 0000 see page 12 for changing the PIN code)

3. When the PIN code has been entered correctly, the word INSTALL will show up on the display.

4. Use the menu buttons upp/down to go to menu item 7. OPTIONS. Press OK to select this menu item. You can

also go to this menu item directly by pressing a 7 on the number pad.

5.Use the menu buttons upp/down to go to menu item ANSWER TYPE. Press OK to select this menu item.

6. You can now select ANSWER ON. ANSWER OFF or VOICE MAIL.

7. Use the menu buttons upp/down to go to the desired menu item and press OK.

8. Press CLEAR again to quit the menu.

1 2 ... 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Electia Home Prosafe Sc9100 Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Electia Home Prosafe Sc9100